Home / Services / Heating Repair

Furnace and heating repair

Furnace Repair in Stamford, CT for No Heat and Weak Heat

When the house is cold and the furnace will not cooperate, safety comes first and guesswork comes last. Here is what to check, what to leave alone and how a heating repair visit works.

Quick answer

No heat? Start here

For furnace repair in Stamford, CT, first make sure nobody is in danger: if you smell gas, leave the house and call 911 or the gas utility from outside. If there is no gas odor, check that the thermostat is set to heat, the breaker is on and the filter is not clogged. If the furnace still will not heat, a licensed HVAC technician needs to test it, and service is available 24/7.

What you might notice

Signs your furnace needs repair

Heating problems rarely fix themselves, and some get worse during the coldest weeks of the year.

  • Blower runs but the air from the vents feels cool
  • Furnace starts, shuts off, then starts again over and over
  • No response at all when the thermostat calls for heat
  • Some rooms warm while others stay cold
  • Banging, squealing or rattling from the furnace or ducts
  • A burning smell that lingers well past the first cold-weather startup
HVAC technician in a hard hat kneeling to inspect an open furnace with a meter

Repair visit

How a heating repair visit works

Each step is aimed at finding the real fault and leaving the system safe to run.

Safety check first

Your technician checks for gas odors, venting problems and signs of overheating before running the furnace through a heating cycle.

Watch the startup sequence

Following the furnace from the thermostat call through ignition to the blower shows where the sequence breaks down, whether at ignition, a sensor, a switch or the blower.

Findings in plain words

You hear what failed, what the repair involves and whether anything else looks worn, with free estimates before work starts.

Repair and test

After the repair, the furnace runs through several full cycles while your technician checks temperatures, airflow and safe operation.

Gas and carbon monoxide safety comes first

If you smell gas or a rotten-egg odor anywhere in the house, do not try to find the source. Leave right away, and call 911 or your gas utility once you are outside. Do not flip light switches, use a phone or unplug anything on the way out, since any of those can create a spark.

Carbon monoxide has no smell, which is why working CO alarms matter in any home with a gas furnace. Keep one outside each sleeping area and on every floor, test them regularly and replace them on the schedule the maker recommends. If an alarm sounds, or people in the house have headaches, dizziness or nausea that ease when they step outside, get everyone into fresh air and call 911.

Once the fire department or gas utility clears the house, call us so a licensed HVAC technician can inspect the furnace before it runs again.

Safe checks before you call, and what to leave alone

Confirm the thermostat is on heat and set a few degrees above the room temperature, and swap the batteries if the display is faint or blank. Look at the breaker panel for a tripped breaker serving the furnace. Reset it once, and if it trips again, leave it off. A clogged filter can make a furnace overheat and shut itself down, so replace it if it looks gray and packed with dust.

Walk the house and make sure supply vents and return grilles are open and not covered by rugs or furniture. If your furnace vents through plastic pipes on an outside wall, check that snow, ice or leaves are not blocking them, since a blocked pipe can keep the furnace from running.

Beyond that, leave the furnace closed up. Do not remove panels, try to relight anything or bypass a switch to make it run. Furnace safety controls shut the system down for a reason, and a technician needs to find that reason.

Related services

Other heating help

Depending on what the visit turns up, one of these may be the next step.

Furnace repair in Stamford, CT and across Fairfield County

Connecticut winters keep furnaces under steady load from late fall into spring, and a breakdown during a cold snap is more than an inconvenience. A licensed HVAC technician handles furnace and heating repair across Stamford, from Shippan and the Cove to Turn of River and Scofieldtown, and throughout Fairfield County in towns like Norwalk, Bethel, Monroe and Weston. Help is available 24/7, nights, weekends and holidays included. See the towns we serve.

FAQ

Common questions

Why is my furnace running but not blowing hot air?

Common causes include a clogged filter that triggers an overheat shutdown, an ignition or flame sensor problem, or a thermostat fan set to on rather than auto. Check the thermostat and filter first. If the air is still cool, the furnace needs to be tested by a technician.

What should I do if my carbon monoxide alarm goes off?

Get everyone out of the house into fresh air and call 911. Do not go back inside until the fire department says it is safe. After that, call us so the furnace can be inspected before it is used again.

Is it safe to keep resetting my furnace?

No. If a furnace keeps shutting down, a safety control is usually reacting to a real problem such as overheating or a venting issue. Repeated resets can hide that problem, so leave it off and call for repair.

Some rooms have heat and others do not. Is that a furnace problem?

It can be, but uneven heat often comes from closed or blocked vents, duct issues or a furnace that is struggling to move enough air. Make sure vents and returns are open first. A technician can then check the furnace and ductwork together to find where the heat is getting lost.

Can I get help on a night or weekend when the heat goes out?

Yes. Stamford HVAC Pros offers 24/7 service, including nights, weekends and holidays. If the house is getting cold, call us and explain what the furnace is doing.

Free estimates, 24/7

Get the heat back on safely

Call us day or night with what you are noticing: no heat, weak heat, strange noises or a furnace that keeps shutting off. A licensed HVAC technician will track down the cause and explain the repair, with free estimates before any work begins.

(203) 680-3703
  • Open 24 hours a day, 7 days a week
  • Licensed HVAC technician
  • Free estimates
  • Serving all of Fairfield County, CT

Have a question first? Read the HVAC FAQ or see the towns we serve.

Request service or a free estimate

Tell us what is going on and how to reach you. We will call you back.